 |
 |
 |
|
|
|
| Program for P!MOT |
You can program with PC and transmit to P!MOT instead of programming with keyboard of P!MOT. *To transmit your program to P!MOT, you will need "INTERFACE CARD (IF-96S) and printer cable (not included).
the system condition of personal computer:DOS/V Model henceforth NEC PC9821 *NEC PC98 series are not operated. Operating system: Windows 95/98ME/XP. Display: resolving more than 800x600 High Color (16bit) |
|
|
|
|
|
|
|
| IconWorks |
"IconWorks" is exclusive software to control the autonomous robot KIROBO. All the commands for programming are displayed by icons, so that you can create a program just by arranging those icons on the screen.
"IconWorks" and "KIROBO" have been developed in order to help beginners in autonomous robotics to experience the joy of programming and to develop their interest in science and technology.
¢£System requirements
¡üWindows XP or Windows Vista
¡ü300MHz or faster
¡ü128MB or more of RAM
¡ü10MB or more of available hard disk space minimum
¡ü800 x 600 SVGA display
¡ü1 available headphone jack required to send a program using sound signals. (The program transfer cable is supplied in the KIROBO package.
Notice: The software uses sound signals of the PC to send programs. Make sure there is no obvious deterioration or noise in the headphone signal output of your PC, otherwise the data transfer might fail to be executed successfully. If you experience difficulties in program transfer, check the operation using another PC.
|
|
|
|
|
 |
|
File size:7.5MB |
|
PDF:10.4MB |
|
|
| MOVIT-LAB II |
With the exclusive software MOVIT-LAB II you can control ROBOT ARM and P!MOT and learn the basics of programming.
[System requirements for MOVIT-LAB II]
OS: Windows ®XP Service Pack 2 / VISTAbr>
CPU: Intel ®Pentium III, 1.0GHx or higher
MEMORY: 256MB or higher
Disk space more than 100MB
DISPLAY: Super VGA (800x600) or higher
Color monitor with high color 16 bits or higher
.NET FRAMEWORK: Microsoft ®.NET Framework 2.0 or higher
* When the above application is not installed, download from Microsoft ®homepage and install.
* Windows ®is a registered trademark of Microsoft Corporation in the United States and/or other countries. |
|
|
|
|
Download
instruction:
(1) Click "Software Download" button
on the left. Download form is displayed.
(2) Fill out the form and click "Start
Download" button.
(3) Downloading will start automatically.
|
|
 *Adobe
Acrobat Reader is reqired for opening the manual.
You can download Acrobat Reader by clicking
the banner on the right.
|
|
 |
|
